Thanks, Rob & Javier. It's a single table form so there's no region and there's nothing to save because the form is based on a "dummy" table with a single row simply to enable display of the images.
However, I seem to remember the SAVEROW "trick" now you mention it - I'll try it later today. I have also found that by setting the table settings to save edits automatically that the message goes away. I had unchecked it as there was nothing to save. Does anybody know if the two methods (pre-define & command) are supposed to have ever so slightly different results or is this one to report to RBTI for clarification in v7? Regards, Alastair. ----- Original Messages ----- > Although this may not directly answer your question regarding the .EEP vs. > Pre-defined > NEXTROW push button, you typically see the message "Do you want to save the > changes?" > when a variable has been associated with a column in a tiered region. > > Make certain to check all the displayed fields and defined variables for the > table your processing > at the point of running the .EEP containing NEXTROW. > > - Rob > > I have run into the same problem and if memory serves, I placed a SAVEROW > command before the NEXTROW and I believe that solved the problem. I will see > If can find that form and verify. > Javier, > > Javier Valencia, PE
