Did you try deleting the old version of the codelocked file first? I can remember long ago sometimes having problems when you were overwriting files.
Troy -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of A. Razzak Memon Sent: Sunday, December 14, 2003 8:31 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: Razzak. File Still Won't Codelock. Rick, If you wish, you may send me that particular command file for me to take a look at. Send the file to my private e-mail address at mailto:[EMAIL PROTECTED] Very Best R:egards, Razzak. At 09:23 AM 12/14/2003 -0600, Rick Brown wrote: >Razzak, > > I tried everything you suggested and the command file still will not >Codelock properly. > > I am using R:Base For Windows v6.5++. Build 1.866xRT03. > > The command file runs perfect as an ASCII command file. > > I traced and steped through the command file with no errors. > > All other command files Codelock and run without any problems. > > This problem has me stumped! > > Any more suggestions? > > Thanks for your help. > >RB > >----- Original Message ----- >From: "A. Razzak Memon" <[EMAIL PROTECTED]> >To: "RBASE-L Mailing List" <[EMAIL PROTECTED]> >Sent: Sunday, December 14, 2003 8:48 AM >Subject: [RBASE-L] - Re: Command File That Won't Codelocke! - Razzak'sReply > > > > At 08:16 AM 12/14/2003 -0600, Rick Brown wrote: > > > > >I have created a command file that will not compile properly. > > > > > >I have R:Styled the command file and it executes perfectly as an ASCII > > >command file. > > > > > >However, when I try to Codelock the file it goes through the motions but > > >the Codelocked > > >file is extremely small and will not execute at all. > > > > > >I know it is not my copy of R:Base because I tried Codelocking other > > >command and > > >procedure files without any problems. > > > > > >Could there be some control characters in the file that prevent it from > > >Codelocking? > > >If so, then how do I locate these control characters and remove them? > > > > > >Can someone offer any suggestions as to what I might do to get this > > >command file to > > >Codelock? > > > > > > Rick, > > > > 00. What Version and Build of R:BASE are you using? > > > > 01. Does that command file work in its entirety? > > > > 02. Have you TRACEd the command? Any -ERRORs- > > > > 03. What happens when you try the Codelock procedure at the > > Command Prompt: > > > > Example: > > > > CODELOCK 1 AsciiFileName BackupFileName BinaryFileName > > > > Very Best R:egards, > > > > Razzak. > > > > > >
