As I have looked at the code and the environment there are several places that this software gets printer information: RBASE.CFG (PRINTER HPLASER1) and from an application called START.RMD (SET VAR vNetPr$ TEXT = 'HPLASER1'). If any one has any other places to look I'd like to know.
One solution provided to me was to go out and buy another printer. I would like to fix it so that this printer works. But with the silence on this list that may be what you all are saying. Rbase Inc wouldn't happen to have a printer driver file like 'HP2300.prd' like the ones supplied with the latest version of rbase for dos - hplaser1.prd would they? Frustratingly yours, Mike ------ ;Hplaser1.prd Hewlett Packard Company ;LaserjetII ;LaserjetIID ;LaserjetIIP #Italics <27 40 115 49 83> #Bold <27 40 115 51 66> #Compressed <27 40 115 49 54 46 54 54 72> #Condensed <27 40 115 49 54 46 54 72> #16.6cpi <27 40 115 49 54 46 54 72> #Underline <27 38 100 48 68> #Superscript <27 38 97 45 54 48 86> #Subscript <27 38 97 43 54 48 86> #Double_wide #Italics_off <27 40 115 48 83> #Bold_off <27 40 115 48 66> #Compressed_off <27 40 115 49 48 72> #Underline_off <27 38 100 64> #Superscript_off <27 38 97 43 54 48 86> #Subscript_off <27 38 97 45 54 48 86> #Double_wide_off #Default_Font1 <27 40 56 85> #Line_Font2 <27 40 49 48 85> #Courier <27 40 115 51 84> #Pitch10 <27 40 115 49 48 72> #Pitch12 <27 40 115 49 50 72> #Proportional <27 40 115 49 80> #Landscape <27 38 108 49 79> #Portrait <27 38 108 48 79> #8_1/2_x_14 <27 38 108 51 65> #8_1/2_x_11 <27 38 108 50 65> #Upper_tray <27 38 108 53 72> #Lower_tray <27 38 108 49 72> #Manual_feed <27 38 108 49 72> #MP_Tray_HP4 <27 38 108 49 72> #Reset <27 69> #8_Lines_per_inch <27 38 108 56 68> #VMI_20_48ths <27 38 108 50 48 67> #VMI_25_48ths <27 38 108 50 53 67> #VMI_67_48ths <27 38 108 54 53 67> #SYMBOL_PC850 <27 40 49 48 85> ------- "A. Razzak Memon" wrote: > > Mike, > > Can you post the original code or you can send me the code > privately at mailto:[EMAIL PROTECTED] > > Also, I'm assuming that you have loaded the correct print > drivers, etc. > > In Windows version of R:BASE, you could simply use the > PRNSETUP 'PAPER SOURCE' option to achieve the same goal. > > Very Best R:egards, > > Razzak. > > At 09:50 AM 1/7/2004 -0600, Mike Savage wrote: > > >I have switched output printers (from HPLJ 4si to HPLJ 2300) and now > >have a problem with proper tray selection. The DOS RBASE65 application > >was designed to print to tray 2 for letterhead and tray 1 for plain > >paper. With the 2300 tray 1 is the single sheet feeder, tray 2 will hold > >the letter head and since tray 3 is a 500 sheet tray it will hold plain > >paper (an end user requirement). > > > >Where would one likely find the "levers" in rbase to switch this > >(application, environment, or somewhere else) and thereby fix my > >problem. > > > >Thanks in advance,
