Patrick Have you tried moving the variable gathering routine outside of the Output Printer. The other thing to look at would be.. Where is the PF and/or RF located.
Buddy -----Original Message----- From: Patrick Murphy [mailto:[EMAIL PROTECTED] Sent: Thursday, February 19, 2004 12:14 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Blank Page Printing I created an all-variable report in 6.5 consisting of three columns of sixty variables each. These are in the Detail area. I run a program to load name and address data into the variables and when the variables are filled (or nearly), I print the report using "where count = 1" and then start gathering and loading variable data for the next page. The variable gathering routine is within the "Output Printer - Output Screen" area. The problem I'm having is that Windows is kicking out a blank page after each printed page. I have Lines Per Page set at 59 and am using an 8 pt font which is printing at about 6 lines per inch. I've tried shorting the number of variables down to 50, reducing the length of the page, but I still get the blank pages. Printing a normal report doesn't generate the blank pages. When I output to the Screen I don't get a blank page. Any ideas to try would be appreciated! Patrick
