I did do a reload with 7.5 before trying the Turbo command. I will do an unload all from 7.5 and run the file with V-8 to see if that works.
I did do the unload all, etc. when first attempting to move to V-8 but I was getting Access Violations. I was trying the Turbo command to see if it made any difference. Still working on the Access Violation problem. Thanks Mike Ramsour AK Steel Coshocton Works Quality Department Phone/VMS: 740-829-4340 _____ From: Brad Davidson [mailto:[EMAIL PROTECTED] Sent: Monday, June 30, 2008 1:49 PM To: [email protected] Subject: [RBASE-L] - RE: Turbo V-8 conversion Mike, have you unloaded your DB and "re-loaded" it for a complete rebuild of structure? I find this useful in such cases. Just a thought. Brad Davidson -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Ramsour Mike Sent: Monday, June 30, 2008 10:45 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Turbo V-8 conversion Top 'o the day to all: I have been trying to upgrade a 7.5 database to V-8 using the Turbo command. The upgrade appears to work correctly. I checked the database with R:Scope 8.0 and it reported no errors. However, if I run AUTOCHK on the database it keeps coming back with an "Error reading column list (1221)" message and an "Error reading column information (1256)" message. Is there something I can look for in the database structure that might be causing this? Mike Ramsour AK Steel Coshocton Works Quality Department Phone/VMS: 740-829-4340
