Jim,
As has been noted, you probably have orphaned sessions around. What has worked for me in the past is to SET MULTI ON, CONNECT to the database, DISCONNECT, SET MULTI OFF then CONNECT. If that fails, you may need to reboot the server. Emmitt Dove Manager, Converting Applications Development Evergreen Packaging, Inc. [email protected] (203) 214-5683 m (203) 643-8022 o (203) 643-8086 f [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Jim Belisle Sent: Monday, May 25, 2009 6:12 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack Adrian, Once I turn rbadmin on, what is the nextstep? Jim _____ From: [email protected] [mailto:[email protected]] On Behalf Of Adrian Hüssy Sent: Monday, May 25, 2009 5:07 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack Jim OK, in this case you have definitely a connection to this database. If you often have this problem, RBAdmin would allow you to display and cancel open connections. I had a similar problem last year with VPN-connections and RDP-sessions which broke down every now and then. But at this special case, R:Base displayed every connection, also broken ones. Good luck Adrian _____ From: [email protected] [mailto:[email protected]] On Behalf Of Jim Belisle Sent: Monday, May 25, 2009 11:53 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack Adrian, I am not able to rename the database so even though I show no connections, there has to be a connection somewhere. I will have to wait until Tuesday to investigate further. Thanks for the suggestions. Jim _____ From: [email protected] [mailto:[email protected]] On Behalf Of Jim Belisle Sent: Monday, May 25, 2009 4:47 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack I will back them up and try. _____ From: [email protected] [mailto:[email protected]] On Behalf Of Adrian Hüssy Sent: Monday, May 25, 2009 4:45 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack Are you able to rename the database files now. You could even rename it back after testing. Adrian _____ From: [email protected] [mailto:[email protected]] On Behalf Of Jim Belisle Sent: Monday, May 25, 2009 11:37 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack I appreciate you looking at the previous emails. I also thought that might be the problem when this first started so I made sure I was disconnected from the other DB and also detached the tables. That did not change anything. jim _____ From: [email protected] [mailto:[email protected]] On Behalf Of Adrian Hüssy Sent: Monday, May 25, 2009 4:35 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack Jim I found a mail from you some days before. You used SCONNECT and SDETACH to attach other databases. Could it be your database is still connected by an ODBC connection and you have trouble to pack them thats why? I would check this point too. Adrian _____ From: [email protected] [mailto:[email protected]] On Behalf Of Jim Belisle Sent: Monday, May 25, 2009 10:35 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack Adrian, Yes I was disconnected when I attempted to set multi off. It turned off but would not allow me to connect. When I set it back on, it allowed me to connect then I checked the connections and it shows only one connection. No one else is working. If someone shut down without getting out of RBASE properly, would it create this problem? jim _____ From: [email protected] [mailto:[email protected]] On Behalf Of Adrian Hüssy Sent: Monday, May 25, 2009 3:33 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: cannot pack Jim, To set MULTi OFF you have to be disconnected. If you are able to connect in MULTI OFF, you are the only one and could do what ever you want. If you arent able to connect in MULTI OFF, there must be an other user connected or you are by yourself connected in an other session. Best Regards Adrian _____ From: [email protected] [mailto:[email protected]] On Behalf Of Jim Belisle Sent: Monday, May 25, 2009 10:22 PM To: RBASE-L Mailing List Subject: [RBASE-L] - cannot pack We have many users here at our company so the default setting is MULTI ON. I need to do Maintenance on the DB (Pack) but when I set the MULTI to OFF it will not allow me to connect. It states The database is connected in a mode that makes it unavailable to you (meaning me). I am the only one on since I go to the TOOLS | CONNECTIONS and it shows only one connection (when I am connected). What would cause this? Jim

