Thomas,

I use the print to text file option without any problems. Fist, on the
report design screen, click "File" on the top menu bar, then select "Print
to Text File setup..." and select the desired options on the setup window,
including the file name.
Then use a command similar to the one I use:

PRINT W_distrep ORDER BY sub_sys ASC, seg_id OPTION ETXT|FILENAME pciraw.dat

W_distrep is thereport name and pciraw.dat is the name I selected on the
Print to text setup window. You can, of course use your own WHERE and ORDER
BY clauses. It works for me and it should work for you.

Javier,

Javier Valencia
913-915-3137

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Thomas J
Hawley
Sent: Saturday, June 27, 2009 10:56 AM
To: RBASE-L Mailing List
Subject: [RBASE-L] - Re: Eliminate Windows Print Prompt when printing to
Disk

On Wed, Apr 22, 2009 at 4:07 PM, Ed Rivkin<[email protected]> wrote:

> My problem is twofold. First I want to automate and bypass the Windows
> "Print" setup.  I cannot seem to eliminate this despite having read and I
believe followed
> the cookbook instructions in "Printing Report as Text File". In addition
the Windows
> "Print" box pops up with "Print to File" already checked but it is
defaulting to .pdf rather
> than .txt.
>
> How do I force .txt and eliminate the Print box prompt.

I'm having the same problem.

The FTE document "Printing Report as Text File" (6 May 2005) in
paragraph 11 gives clear instructions "to print to a text file without
user intervention" but no matter what I try I always get the print
dialog with PDF as file type and some other file name (not the one
I've set in the "Print to Text File Setup") suggested.  I can change
this to TXT and supply a different file name, and the report then
prints exactly as it should, but surely there must be some way to
automate this?

Paragraph 11 states:

============
11. To automate the entire printing process, use:
 PRINT ReportName WHERE ... ORDER BY ... OPTION TXT
This will allow the report to print to a text file without user
intervention.
 The report will print to the filename specified in the Text File Name
property, but the Print Dialog will not display the Print to File
CheckBox or File... button.
============

The functionality described does not seem to be present in 7.6.7;
possibly this is how it once worked, and something became broken?

I've tried deleting and recreating the report several times, but to no
avail.

There's another glitch in the FTE doc (and also in the substantially
similar technical note in the Help's Reference Index) in paragraph 06
which states "Click [Save Length] button to save the length for a
selected column."  "Save Length" on this dialog is just a text label;
it is not a clickable button.  The actual process for setting and
saving a length is a bit of trial and error: enter a length value,
click off the item, and then going back to see if the intended length
setting actually took.  But eventually you can get it right.

Tom Hawley
Burke & Parsons, New York


Reply via email to