Jim, It would be a form variable. vDateCheck would preferable also be a form variable listed prior to the crazy one.
In theory that should work. Personally I use the Form Timer eep. Jan -----Original Message----- From: "Jim Belisle" <[email protected]> To: [email protected] (RBASE-L Mailing List) Date: Wed, 9 Dec 2009 10:44:08 -0600 Subject: [RBASE-L] - Re: form within form Jan, Would the Variable below be in the regular variables section or in an on after start EEP? From: [email protected] [mailto:[email protected]] On Behalf Of jan johansen Sent: Wednesday, December 09, 2009 10:37 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: form within form Jim, Sorry. Was offline for awhile. The evaluation of enableing the button MUST be external to the button. So the whole eep would exist in maybe the form timer or some other key press. You might even be able to try a crazy form variable like so (IFNULL(.vdatecheck,('PROPERTY Comp_BOLDetail ENABLED '''FALSE''''),('PROPERTY Comp_BOLDetail ENABLED '''TRUE''''))) Double check all the quotes and parantheses in this because it wasn't RStyled. Jan -----Original Message----- From: "Jim Belisle" <[email protected]> To: [email protected] (RBASE-L Mailing List) Date: Wed, 9 Dec 2009 09:27:26 -0600 Subject: [RBASE-L] - Re: form within form Would this EEP be in the bit button as GETPROPERTY comp_boldate textvalue vdatecheck IF vdatecheck IS NULL THEN PROPERTY Comp_BOLDetail ENABLED 'FALSE' ELSE PROPERTY Comp_BOLDetail ENABLED 'TRUE' ENDIF I did the above and it still allowed me into the form BOLDetail. Jim From: [email protected] [mailto:[email protected]] On Behalf Of jan johansen Sent: Wednesday, December 09, 2009 9:13 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: form within form Jim, Don't enable the button until conditions are met. IF vdatecheck IS NULL THEN PROPERTY mybolbutton ENABLED 'FALSE' ELSE PROPERTY mybolbutton ENABLED 'TRUE' ENDIF Jan -----Original Message----- From: "Jim Belisle" <[email protected]> To: [email protected] (RBASE-L Mailing List) Date: Wed, 9 Dec 2009 08:55:34 -0600 Subject: [RBASE-L] - form within form I have a primary Bill of Lading form that has a header and detail section. The header is populated with information from our orderheader and detail section from orderrows table. Upon entry the EEP checks for certain information and if the criteria is met, goes to the detail section before the BOL date is filled in the Header. I do this because I want to make sure this information is not overlooked when shipping partials. Once back in the header, I then have a bit button that is eventually pressed to fill in Bill of lading rows. This is separate from the detail section on the main form and is for package weights etc. What I have tried but failed to do is create code that will not allow me into the bit button form if the BOL date is null. I have a component ID on the BOL date field and tried this on the Bit button. GETPROPERTY comp_boldate textvalue vdatecheck IF vdatecheck IS NULL THEN PAUSE 2 USING 'No Date or BOL info Entered' CAPTION 'NEED DATE' ICON serious BUTTON 'STOP' GOTO done ENDIF LABEL done CLOSEWINDOW PROPERTY comp_boldate SET_FOCUS 'TRUE' RETURN Any suggestions? Jim We have a nice snow storm here in Iowa. Nice to work from the house.
