Bill, I have been driving myself nuts. Can't seem to grasp this. I am trying to display a vendor on the form such as 'Stop and review the data now' Based on the following: vthis_parentcustid = 105 and vthis_hub <= 999999 Originally I was trying to set this based on a variable and data in a table but was told it would be faster if used two variables. So actually it is two variables not three In your example isn't the message going to contain the content of the variables? Thanks for the help
________________________________ From: [email protected] on behalf of Bill Eyring Sent: Wed 12/16/2009 10:11 AM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Displaying Message On Form on Initial Entry of Data Steve, Try this; Set v vmsg=(.var1&.var2&.var3) Pause 2 using .vmsg (etc., with your settings) If you want to display a message on only 1 of the 3 variables you would have to decide which variable has preference such as: If var1 is not null and var2 is null and var3 is null the set v vmsg=.var1 pause 2 using .vmsg, etc. endi ..and so on. Hope that helps. Bill Eyring ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Steve Breen Sent: Wednesday, December 16, 2009 10:04 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Displaying Message On Form on Initial Entry of Data I am trying to display a vMessage = '?' based on three variables. What is the best way to do this ? vMessage1 = 'test' where ? Thanks for the help
