Thanks, Mike, I'll try that and I know Switch works it goes through others
before this code but also in plenty of other forms and so on. I just can't
find anything in this to put right!
Regards,
Alastair.
--------------------------------------------------
From: "Mike Byerley" <[email protected]>
Sent: Friday, June 11, 2010 5:39 PM
To: "RBASE-L Mailing List" <[email protected]>
Subject: [RBASE-L] - RE: EEP Switch/Endsw problem (v9.0_32)
Alastair,
Remove everything between the case statements and the breaks. See if the
offense is in the code segments. If you can get it to clear that hurdle
then add the statement segments piecemeal till you get to the issue.
I can assure that the Switch/EnsSw works as expected in 9.x
----- Original Message -----
From: "Alastair Burr" <[email protected]>
To: "RBASE-L Mailing List" <[email protected]>
Sent: Friday, June 11, 2010 11:34 AM
Subject: [RBASE-L] - RE: EEP Switch/Endsw problem (v9.0_32)
Thanks, Doug, it _should_ be impossible but point taken and about to be
implemented.
Regards,
Alastair.
From: Doug Hamilton
Sent: Friday, June 11, 2010 3:22 PM
To: RBASE-L Mailing List
Subject: [RBASE-L] - RE: EEP Switch/Endsw problem (v9.0_32)
Alastair, in addition to Dennis' suggestion, you may want to add a
DEFAULT block before the ENDSW to catch the rare instance when vNameTitle
is not 'Name' or 'Title'.
PROPERTY VID_vSelName ENABLED 'FALSE'
IF vTitleType = 'TrackTitle' THEN
PROPERTY RBID_SortTitle ENABLED 'FALSE'
ELSE
PROPERTY RBID_SortTitle ENABLED 'TRUE'
ENDIF
BREAK
DEFAULT
--error message or action if vNameTitle is not Name or Title
BREAK
ENDSW
Doug
Dennis McGrath wrote:
Before pressing F10 on the switch line, try to add a watch on
vNameTitle.
I venture to say it is not there or is misspelled or is not a text
variable.
Dennis McGrath
----------------------------------------------------------------------------
From: [email protected] [mailto:[email protected]] On Behalf Of
Alastair Burr
Sent: Friday, June 11, 2010 7:24 AM
To: RBASE-L Mailing List
Subject: [RBASE-L] - EEP Switch/Endsw problem (v9.0_32)
I have an EEP which used to work in v7.6 but is giving me an error in
v9.
I have Traced and R:Styled endlessly this morning but to no avail -
there just doesn't seem to be anything wrong and I have run out of ideas
of what else to look for.
The first error message is the usual Endwhile, Endsw or Endif missing
in input file (462)
After clearing that I get what seems contradictory: No While, Switch or
If blocks are open on current input source (466)
This is the relevant block of code:
--
---------------------------------------------------------------------------
-- Return the parameters back to the form to build the menu:
--
---------------------------------------------------------------------------
PROPERTY IDGB_EnterChoices VISIBLE 'FALSE'
PROPERTY IDGB_ChoiceMade VISIBLE 'TRUE'
SWITCH (.vNameTitle) -- fails on pressing [F10] on this line?
CASE 'Name'
PROPERTY RBID_NameTitle ENABLED 'FALSE'
PROPERTY RBID_NameType ENABLED 'FALSE'
PROPERTY RBID_TitleType ENABLED 'FALSE'
PROPERTY RBID_SortName ENABLED 'TRUE'
PROPERTY RBID_SortTitle ENABLED 'FALSE'
PROPERTY VID_vSelName ENABLED 'TRUE'
BREAK
CASE 'Title'
PROPERTY RBID_NameTitle ENABLED 'FALSE'
PROPERTY RBID_NameType ENABLED 'FALSE'
PROPERTY RBID_TitleType ENABLED 'FALSE'
PROPERTY RBID_SortName ENABLED 'FALSE'
PROPERTY VID_vSelName ENABLED 'FALSE'
IF vTitleType = 'TrackTitle' THEN
PROPERTY RBID_SortTitle ENABLED 'FALSE'
ELSE
PROPERTY RBID_SortTitle ENABLED 'TRUE'
ENDIF
BREAK
ENDSW
PROPERTY TABLE Temp_MCM_Table 'REFRESH'
PROPERTY CID_vSelId ENABLED 'TRUE'
PROPERTY CID_vSelId SET_FOCUS 'TRUE'
PROPERTY CID_vSelId REFRESHLIST 'TRUE'
PROPERTY CID_vSelId LISTOPEN 'TRUE'
PROPERTY IDI_Image SET_FOCUS 'TRUE'
RETURN
Anybody got any ideas whatmay be going on?
Regards,
Alastair
----------------------------
Alastair Burr
St. Albans, UK.
[email protected]
-----------------------------
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.829 / Virus Database: 271.1.1/2931 - Release Date: 06/11/10
07:35:00
