Yeah, Since all the code is in the forms and reports now, I'm thinking of just unloading all of them seperately and if there is a problem, just reload the suspect area.
Jan -----Original Message----- From: "Brad Davidson" <[email protected]> To: [email protected] (RBASE-L Mailing List) Date: Mon, 7 Feb 2011 11:38:09 -0800 Subject: [RBASE-L] - RE: Server problem resolved Jan, Thanks for sharing the results of your troubleshooting. We’re similarly on a 1GB LAN (all hardware,cabling,NIC’s, Switches) and are enjoying performance of our R:BASE compiled app. And apropos with your form issue, just this morning had a similar occurrence with a report which was a head scratcher and all usual items checked to no success. So, in 15 minutes I recreated the same design and all is fine again – 15 minutes well spent and in my case and perspective, a lot quicker than hours of asking “why” and looking all over the place. Now, there are times I must know “why” but not in this case; suspect disruption in last night’s backup/optimization routine – dirty “power” and failed UPS! Brad From: [email protected] [mailto:[email protected]] On Behalf Of jan johansen Sent: Monday, February 07, 2011 10:17 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Server problem resolved Well, The good news is that I located my server challenge. It appears that a couple of my R:BASE forms “broke”. I can't tell you why. Perhaps they ended up over a bad spot on the hard drive. As many of you know, I am a big fan of the Variable List View. I use it in a lot of places. My main startup form has them. Now for whatever, the form would work fine with 2 or 3 people logged in but would burp after that and it would take maybe 3 minutes for a person to log in. I just recreated the ListView and we are back up and running. There are still a couple of problems that I'm working through. One of them has to do with images in a form but I also know that there has been a lot of recent work on that so I'm bein g patient until the next update. I know it is a form problem because I can do a save from a data row with an image but if I try to save a row from within a form with an image, I get totally thrown out. I only have 2 forms with images and they both do the same. This also only occurs across the network. Run these forms on my local machine and they are fine. I'm just waiting until the next update before I chase this one further as my folks have a work-around. The other good news is that I know that I have a healthy network now. All the wiring has been checked, new switch in place, every machine has a 1GB NIC in it and at least 1GB of RAM. Finally my new 2008 server should arrive shortly. Please understand that I don't believe any of this to be a problem with R:BASE. Jan
