Hi Dr. Razzak, I agree, I am not using the Label maker. The "labels" I am using are 4 and 3/16" tall (4.1875 inches). I can't find a label template that matches. Is there a way I can use the Label Maker with an odd size label? Mike
________________________________ From: A. Razzak Memon <[email protected]> To: RBASE-L Mailing List <[email protected]> Sent: Saturday, March 3, 2012 10:28 PM Subject: [RBASE-L] - Re: Lines per page and Page Footer Line Numbera At 09:57 PM 3/3/2012, Michael J. Sinclair wrote: > Actually, I am doing that right now! > Here is what I have...and I think I am close. > I put 4 PCC in the label Page Header, all at the very top, left to right... > reset <27 64> 8 lines per inch <27 48> page length <27 67 36> reverse > line feed <27 106 54> > > I made the "position" of the Page Header 0.0001 (is that ok since the printer > control codes should not take up any space? > > The problem I am still having, is trying to get the paper to advance to the > top of the next page after the printing is done. > If I had a FormFeed to the Page Footer, or to the lower right hand corner of > the details line, I thought it should work, but it does not work for me. > Rbase seems to be reading (or at least acting on) the Form Feed before I even > start printing. > > What am I doing wrong? FWIW, you are NOT using the LABEL. Using the R:BASE "LABEL Designer", you can customize everything including: . Label Templates . Printer Information (Dot Matrix, Laser and Ink Jet) . Label Information (Type, Height, Width, Paper Size) . All Objects on [Detail] Band . Detail Band - Before Generate Custom EEP . Detail Band - After Generate Custom EEP Hope that provide you with some blue's clues! Very Best R:egards, Razzak.
