Make your own Pause with another form that in the onAfterEEP use the Sleep API and then execute CloseWindow. See What happens, It will take you less time to test it than I can test and reply... I would test it both with Edit and with MDI
----- Original Message ----- From: "Michael J. Sinclair" <[email protected]> To: "RBASE-L Mailing List" <[email protected]> Sent: Monday, September 10, 2012 1:35 PM Subject: [RBASE-L] - RE: PAUSE for less than one second. Mike B, I agree with you test bed, I found the same. A quick fix might be available if the Pause for n command could have a number less than 1 such as 0.25. FWIW, this code in my Bit Button works... PROPERTY id_bigpdf gourl .vdisplayname PAUSE FOR 1 USING .vdoccounter OPTION TOP 750 | LEFT 300 PROPERTY id_vfolder set_focus 'TRUE' PROPERTY id_vfolder lastchar 'true' It causes a bit of annoying delay (1 second to be exact) but overall, it works pretty well with or without the AUTOSELECT enabled. Mike ________________________________ From: Mike Byerley <[email protected]> To: RBASE-L Mailing List <[email protected]> Sent: Monday, September 10, 2012 12:32 PM Subject: [RBASE-L] - RE: PAUSE for less than one second. Sleep has nothing to do with GUI. AFA your existing code, I went round and round with this issue some time ago. I have a little test bed I set up and looking at it, I can't see that I came to a satisfactory resolution. I think it has to do with the exact timing of the OnNavigationComplete event. You can put a Set_Focus command in there to direct focus to another edit control and it doesn't seem like it fires (at least the set focus part), but if you put a pause in either the OnNavigationComplete or in the OnEnter in the edit control, focus will remain on the edit control. However, If you set the edit control properties to AutoSelect, focus does go to it correctly, but if you add the property LastChar to the edit control, it loses focus. Perplexing, but Sleep has nothing to do with it and a While Loop wouldn't do anything for you. I might mess with it later for a bit, but I think I beat it up pretty good before. ----- Original Message ----- From: "Michael J. Sinclair" <[email protected]> To: "RBASE-L Mailing List" <[email protected]> Sent: Monday, September 10, 2012 11:45 AM Subject: [RBASE-L] - RE: PAUSE for less than one second. Mike B, Can your Sleep API pull the focus away from the Web Browser object? I am using the Pause command because I want to change the focus from the Web Browser (foucus placed on the WEB Browser with a GOURL), to a variable edit object. I tried using the on Navigation Complete EEP, but the focus refuses to change for me unless I follow the GOURL with a Pause command. Mike ________________________________ From: Mike Byerley <[email protected]> To: RBASE-L Mailing List <[email protected]> Sent: Monday, September 10, 2012 11:25 AM Subject: [RBASE-L] - RE: PAUSE for less than one second. These all work OK, but as Larry pointed out, when you use a while loop, it consumes the capacity of the processor, so NOTHING else that needs a slice of time within the span of time the while loop runs will function properly. The Sleep API consumes no processor cycles. That is the advantage and it doesn't require any mucking around with your time format mid stream. ----- Original Message ----- From: "Stephen Markson" <[email protected]> To: "RBASE-L Mailing List" <[email protected]> Sent: Monday, September 10, 2012 10:20 AM Subject: [RBASE-L] - RE: PAUSE for less than one second. We use option 1 in codelock to create a binary command file called DELAY from the following ASCII file: -- Usage: RUN Delay USING <time in seconds to nearest millisecond> -- Example: "RUN Delay USING 3.5" will pause for 3.5 seconds SET V x REAL=.%1 SET V TimeFormat=(CVAL('TIME')) SET TIME FORMAT HH:MM:SS.SSS SET V Start TIME=.#TIME,Delay INTEGER=(NINT(.x*1000)) WHILE #TIME<(.Start+.Delay) THEN ENDWHILE SET TIME FORMAT &TimeFormat CLEAR V Start,Delay,TimeFormat,x RETURN Regards, Stephen Markson The Pharmacy Examining Board of Canada 416.979.2431 x251 From: [email protected] [mailto:[email protected]] On Behalf Of Lawrence Lustig Sent: Wednesday, September 05, 2012 11:33 AM To: RBASE-L Mailing List Subject: [RBASE-L] - PAUSE for less than one second. I want to pause each time through a loop, but only for 250 milliseconds (a quarter second). PAUSE FOR works fine for whole numbers of seconds. Is there any way to pause for something shorter than a second? -- Larry
