I have seen this issue raised several time and it happens because the SFIL
function loses trailing blanks.
I t would be nice to have a function:
SET VAR vspad = (SPAD(' ', 100)
That will keep the blanks at the end of the string. J
Javier,
Javier Valencia, PE
O: 913-829-0888
H: 913-397-9605
C: 913-915-3137
From: [email protected] [mailto:[email protected]] On Behalf Of Karen Tellef
Sent: Monday, January 05, 2015 5:43 PM
To: RBASE-L Mailing List
Subject: [RBASE-L] - Re: Fixed field file
Thanks but nope, it still does not retain the 675 sfil-ed spaces at the end.
Looks like maybe I will have to resort to using a cursor with a
sfil/sput/write. I don't want to do that because there are thousands of
rows to cursor through, and this one select is almost instantaneous.
Karen
-----Original Message-----
From: Bill Downall <[email protected]>
To: RBASE-L Mailing List <[email protected]>
Sent: Mon, Jan 5, 2015 5:20 pm
Subject: [RBASE-L] - Re: Fixed field file
Karen,
SELECT that way does its own CR/LF.
How about:
SET V v675spaces TEX = (SFIL(' ', 675))
...Blah blah
SELECT ( LJS(SGET(policy_no,12,1),50) + LJS(tmpUniqueText,50) + LJS(ssn,9) +
LJS(firstname,50) +
+ ....... + .v675spaces )=1450 +
FROM tmpMIB
Bill
(sent from Android mobile)
On Jan 5, 2015 6:10 PM, "Karen Tellef" <[email protected]> wrote:
Well, Albert's solution ALMOST works. It does indeed put a carriage return
exactly where I want it, so it retains the 675 blank spaces at the end.
However, it puts an extra carriage return (therefore a blank row) between
each row of data. Is there a way to suppress that, like a "write....
continue" would? Here's the relevant code and how different "vCRLF"
variables evaluated:
SET WIDTH 1500
SET VAR vCRLF = (CHAR(013))
SET HEADINGS OFF
SET SELMARGIN 1
OUTPUT MIB.TXT
SELECT ( LJS(SGET(policy_no,12,1),50) + LJS(tmpUniqueText,50) + LJS(ssn,9) +
LJS(firstname,50) +
+ ....... + (SFIL(' ',675)) + .vCRLF )=1450 +
FROM tmpMIB
OUTPUT SCREEN
Value of vCRLF:
char(013) + char(010) this puts a blank row between each data row
char(013) same as above
char(010) does not retain the blank spaces, does a carriage return right
after last data
Karen
-----Original Message-----
From: Albert Berry <[email protected]>
To: RBASE-L Mailing List <[email protected]>
Sent: Sun, Jan 4, 2015 6:18 pm
Subject: [RBASE-L] - Re: Fixed field file
Would something like this work to create the line? Assumption is no CRLF at
the end of the variable .vDataLine.
SELECT (DataLine + (SFIL(' ',675)) + .vCRLF) FROM ...
Albert
On 1/4/2015 1:14 PM, Karen Tellef wrote:
I need to create a file with fixed field lengths. Rather than doing
SFIL/SPUT I did a "select" statement and it works great and is easy to code,
except...
I need to have 675 blank spaces at the end of each line and I can't figure
out how to do that using a "select" statement. Has anyone done that, or do
I need to use SFIL/SPUT. According to my notes, if I use SFIL/SPUT I'll
have to use a cursor and then do something like this (and thanks to whoever
originally posted this code and I saved it):
--Add CarriageReturn/LineFeed charaters to the line
Set var vDataLine = (SPUT(.vDataLine,.vCRLF,.vPastEnd))
--Make sure no trash data exists beyond CR/LF
Set var vDataLine = (SGET(.vDataLine,..vTotalLength,1))
--Write the line, telling RBASE not to add its own CRLF
WRITE .vDataLine CONTINUE
Karen
--
A democracy ..." can only exist until the majority discovers it can vote
itself largess out of the public treasury."
Attributed to Alexander Fraser Tytler 1747-1813
