I am using RBase for windows 6.5+ build 1.839xRT03. I have a designed a report base on a three part laser check. A single check contains summary data and the actual check information. The report consists of one large break footer section. I cannot seem to find the correct report settings to print all of the information on page. It is not that I have too much data. I am trying to lay the report out in such a way that the top part has the summary information, the middle and the bottom have the check information. I have placed all of the field ands variables appropriately on the report with what I can tell in allowable limits, but it does not work. The fuzzy logic that I am using says that a sheet of paper is 8 1/2 x 11, so I should be able to make the break footer section somewhere between 10 and 11 inches long. If I put any fields or variables (for the third section of the check) below 7 or 8 inches those items get printed on second page. The report settings have 59 lines per page, form feed after report footer, and portrait orientation. I have tried changing the lines per page to 0 and -1 but still get the same results.
Any ideas as to how I can use the entire page? Thanks, Damian
