Boy can I relate to this situation, except my app was just freezing without any error messages, but I eventually found my problem (Not RBASE) yesterday..
After installing a program that tested flawlessly on my laptop, and my test network, I installed it at the client. The 'problem' computer runs RBdos programs all day with never a problem. But the RBwin application would crash quickly. I spent hours improving my code looking for possible problems and nothing I tried eliminated the problem. I switched network cards, added memory, and played with configurations and then exchanged computers and still RBWin would crash. I eventually borrowed their computer and put it on my network and BINGO! not a single crash. Back at the client offices we tested their cabling with a Compas Ethernet wiring tester and everything tested OK. But when I crawled up into the ceiling I found the cat 5 cable running across a fluorescent light and a severe 180 degree bend in the cable. I replaced the cable and the problem seems to have disappeared. Why they never had a problem with my 6.5++ DOS version vendor order program and had nothing but problems running my 6.5++ windows version baffles me still. TGIF Kenny Camp ----- Original Message ----- From: "Ben Petersen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 02, 2001 8:11 AM Subject: Re: Illegal Operation Error Message > Sharon, > > I've experienced the same thing. Runs fine on my development > machine under runtime but crashes at the remote site using the > same DB and application files. Let me know if you resolve it... > please. > > Ben Petersen > > > On 2 Nov 2001, at 11:00, SHARON LIMA wrote: > > > Using Rtime65W+ > > On a client's computer each time a particular function > > is tried the following error message is displayed: > > > > Illegal Operation in RTIME65W > > Invalid page fault in module ----- > > Unknown --------- > > > > (I have seen this message myself in sporadic instances > > but when tried later everything worked fine.) > > > > In this case it happens every time the particular > > function is tried. They have sent me a copy of > > their database to test on my computer. > > I DO NOT get the error message running their > > database on my computer. The function worked fine here. > > The function contains recursive processing of data from > > a temporarily loaded table. > > > > The only thing that has changed there is that they > > did network their computers. However, the Rbase > > application is running completely on the one computer. > > > > Are there settings for either Rbase or the computer that > > would apply here? > > > > Thanks for your help, > > Sharon > > > > > >
