Stan,
I'll keep that in mind if problems persist.
Thank you,
Sue
----- Original Message -----
From: "suredata" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 06, 2002 2:28 PM
Subject: Re: Multi User
> Don't forget the power supply. Replace it with an Enermax where you can.
> Also make sure that the CPU heatsink is suitable for your CPU -- a
> particularly important issue for AMD Athlon CPUs.
>
> Stan Loo
>
>
> ----- Original Message -----
> From: "Susan Seelye" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, February 06, 2002 12:02 PM
> Subject: Re: Multi User
>
>
> > Troy,
> > I checked it with autochk - no errors
> > I just reloaded it.
> > I do have a UPS attached. It appears to be working fine but, I am going
> to
> > switch it with another. Had our electrician check the circuits in my
> office,
> > some variation, but seems to think it's normal.
> >
> > I have had the HDD, CD-RW, Motherboard with integrated NIC, and finally
> the
> > Memory ( I couldn't copy this db on my HDD to my personal folder on the
> > network, would drop the connection) replaced in that order on this
machine
> > since purchasing it in June of last year. I have a problem with
> fragmented
> > files also.
> >
> > I tried earlier this morning to del from and load 4 tables and was
> > unsuccessful, I waited approx. 1 hour, tried again, worked - no problem.
> We
> > thought maybe it was a licenseing issue with Novell - 10 user license so
> we
> > shut down a PC on the network - seemed to help but same problems
> > re-occurring again.
> >
> > Thanks,
> > Sue
> >
> > ----- Original Message -----
> > From: "Troy Sosamon" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Wednesday, February 06, 2002 11:13 AM
> > Subject: RE: Multi User
> >
> >
> > > Sue,
> > >
> > > Have you checked your database for corruption with autochk?
> > > Have you reloaded it reciently?
> > > Do you have a UPS on your machine?
> > >
> > > You could get these errors if you have some corruption in your
database.
> > > You might have a hosed index that would not show up with autochk, but
> > might
> > > cause problems during a delete.
> > >
> > > Most of the time when you start getting corruption in the database I
> have
> > > found it to be from not having a UPS on the machine. Sometimes you
see
> > > brownouts in the electricty that may not cause your machine to reboot,
> but
> > > can cause it to not finish some operationsl.
> > >
> > > Troy Sosamon
> > >
> > > ------ original message
> > > Hi All,
> > > I am working on a db on my hard drive and sometimes when trying to del
> > from
> > > a table I get an error message:
> > > Multi User Message: Resources required by command are not available.
> Has
> > > anyone else had this problem?
> > >
> > > Also, on this db the quote setting was originally set as double (") I
> have
> > > changed to single (') and Idquotes was blank, I try to change to ` but
> it
> > > doesn't hold after saving and closing out of the settings. I have
> changed
> > > the .cmd and .eep files. I did a replace " with '. Any help would be
> > > appreciated.
> > >
> > > Thanks,
> > > Sue Seelye
> > >
> > > ================================================
> > > TO SEE MESSAGE POSTING GUIDELINES:
> > > Send a plain text email to [EMAIL PROTECTED]
> > > In the message body, put just two words: INTRO rbase-l
> > > ================================================
> > > TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED]
> > > In the message body, put just two words: UNSUBSCRIBE rbase-l
> > > ================================================
> > > TO SEARCH ARCHIVES:
> > > http://www.mail-archive.com/rbase-l%40sonetmail.com/
> >
> >
> > ================================================
> > TO SEE MESSAGE POSTING GUIDELINES:
> > Send a plain text email to [EMAIL PROTECTED]
> > In the message body, put just two words: INTRO rbase-l
> > ================================================
> > TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED]
> > In the message body, put just two words: UNSUBSCRIBE rbase-l
> > ================================================
> > TO SEARCH ARCHIVES:
> > http://www.mail-archive.com/rbase-l%40sonetmail.com/
> >
>
> ================================================
> TO SEE MESSAGE POSTING GUIDELINES:
> Send a plain text email to [EMAIL PROTECTED]
> In the message body, put just two words: INTRO rbase-l
> ================================================
> TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED]
> In the message body, put just two words: UNSUBSCRIBE rbase-l
> ================================================
> TO SEARCH ARCHIVES:
> http://www.mail-archive.com/rbase-l%40sonetmail.com/
================================================
TO SEE MESSAGE POSTING GUIDELINES:
Send a plain text email to [EMAIL PROTECTED]
In the message body, put just two words: INTRO rbase-l
================================================
TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED]
In the message body, put just two words: UNSUBSCRIBE rbase-l
================================================
TO SEARCH ARCHIVES:
http://www.mail-archive.com/rbase-l%40sonetmail.com/
