Alastair, Have you tried running the EEP off the table settings? On row entry, On row exit, After saving row, After leaving section.
I had a similar problem and this worked for me. Also try a saverow Hope this sheds some light. Rich Starkey -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alastair Burr Sent: Friday, April 26, 2002 6:23 PM To: [EMAIL PROTECTED] Subject: Re: Screen Restore Randy, The EEP is run on leaving the row but I don't usually enter the last updateable field in the row... maybe there's something in that - worth checking anyhow which I'll do over the next day or two. I've also checked both the variable and the field orders, as Damon suggested, and whilst I don't think anything was out of order there were a couple of not quite logical (but not dependant) sequences which could confuse things I suppose. I'll play with those, too. Thanks to both of you, Regards, Alastair. ----- Original Message ----- From: "randyp" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, April 25, 2002 8:24 AM Subject: Re: Screen Restore > By any chance is your eep in the last updateable field on the row? > Try adding a variable field that can be updated on the far right of your form > in the region detail line. It can have the same color as the background and > be 'invisible'. > > Apparently sometimes it is necessary for the cursor to leave the present > > field and 'land' in another on the same row for the the fields after the field > with the eep to update the screen, where they are lookups or calculations > based on the field with the eep. > > Another thing to check is whether you are using an eep which runs when > you enter or leave a field, or when you enter or leave a row. > > Randy Peterson > > > > > > > > > I also have a form where I have to "scroll" through the rows to get data > > > > updated - usually having to go down and then back up the form at least > > twice > > > > before I am sure everything is correct. It does get updated but _only_ > > after > > > > going into and out of each row _after_ having entered the data and left > > the > > > > row. > > > > > > > > Anybody able to shed any light? > > > > Regards, Alastair. > > > > ================================================ > TO SEE MESSAGE POSTING GUIDELINES: > Send a plain text email to [EMAIL PROTECTED] > In the message body, put just two words: INTRO rbase-l > ================================================ > TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] > In the message body, put just two words: UNSUBSCRIBE rbase-l > ================================================ > TO SEARCH ARCHIVES: > http://www.mail-archive.com/rbase-l%40sonetmail.com/ ================================================ TO SEE MESSAGE POSTING GUIDELINES: Send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: INTRO rbase-l ================================================ TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: UNSUBSCRIBE rbase-l ================================================ TO SEARCH ARCHIVES: http://www.mail-archive.com/rbase-l%40sonetmail.com/ ================================================ TO SEE MESSAGE POSTING GUIDELINES: Send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: INTRO rbase-l ================================================ TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: UNSUBSCRIBE rbase-l ================================================ TO SEARCH ARCHIVES: http://www.mail-archive.com/rbase-l%40sonetmail.com/
