I've now tried what you've suggested, Rich, as well as the suggestions from Damon and Randy but still no change.
I guess waiting until v7 is ready is probably best as it's not a _major_ problem for me - I've got used to pressing [F7] and [F8] and I could always write a playback file to do that if I ever get bored <g>. Thanks & regards, Alastair. ----- Original Message ----- From: "Richard Starkey" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, April 27, 2002 1:27 PM Subject: RE: Screen Restore > Alastair, > > Have you tried running the EEP off the table settings? > On row entry, On row exit, After saving row, After leaving section. > > I had a similar problem and this worked for me. > > Also try a saverow > > Hope this sheds some light. > > Rich Starkey > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On > Behalf Of Alastair Burr > Sent: Friday, April 26, 2002 6:23 PM > To: [EMAIL PROTECTED] > Subject: Re: Screen Restore > > > Randy, > > The EEP is run on leaving the row but I don't usually enter the last > updateable field in the row... maybe there's something in that - worth > checking anyhow which I'll do over the next day or two. > > I've also checked both the variable and the field orders, as Damon > suggested, and whilst I don't think anything was out of order there were a > couple of not quite logical (but not dependant) sequences which could > confuse things I suppose. I'll play with those, too. > > Thanks to both of you, > Regards, Alastair. > > > > ----- Original Message ----- > From: "randyp" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, April 25, 2002 8:24 AM > Subject: Re: Screen Restore > > > > By any chance is your eep in the last updateable field on the row? > > Try adding a variable field that can be updated on the far right of your > form > > in the region detail line. It can have the same color as the background > and > > be 'invisible'. > > > > Apparently sometimes it is necessary for the cursor to leave the > present > > > > field and 'land' in another on the same row for the the fields after the > field > > with the eep to update the screen, where they are lookups or calculations > > based on the field with the eep. > > > > Another thing to check is whether you are using an eep which runs > when > > you enter or leave a field, or when you enter or leave a row. > > > > Randy Peterson > > > > > > > > > > > > I also have a form where I have to "scroll" through the rows to get > data > > > > > updated - usually having to go down and then back up the form at > least > > > twice > > > > > before I am sure everything is correct. It does get updated but > _only_ > > > after > > > > > going into and out of each row _after_ having entered the data and > left > > > the > > > > > row. > > > > > > > > > > Anybody able to shed any light? > > > > > Regards, Alastair. > > > > > > > > ================================================ > > TO SEE MESSAGE POSTING GUIDELINES: > > Send a plain text email to [EMAIL PROTECTED] > > In the message body, put just two words: INTRO rbase-l > > ================================================ > > TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] > > In the message body, put just two words: UNSUBSCRIBE rbase-l > > ================================================ > > TO SEARCH ARCHIVES: > > http://www.mail-archive.com/rbase-l%40sonetmail.com/ > > ================================================ > TO SEE MESSAGE POSTING GUIDELINES: > Send a plain text email to [EMAIL PROTECTED] > In the message body, put just two words: INTRO rbase-l > ================================================ > TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] > In the message body, put just two words: UNSUBSCRIBE rbase-l > ================================================ > TO SEARCH ARCHIVES: > http://www.mail-archive.com/rbase-l%40sonetmail.com/ > > > ================================================ > TO SEE MESSAGE POSTING GUIDELINES: > Send a plain text email to [EMAIL PROTECTED] > In the message body, put just two words: INTRO rbase-l > ================================================ > TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] > In the message body, put just two words: UNSUBSCRIBE rbase-l > ================================================ > TO SEARCH ARCHIVES: > http://www.mail-archive.com/rbase-l%40sonetmail.com/ ================================================ TO SEE MESSAGE POSTING GUIDELINES: Send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: INTRO rbase-l ================================================ TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: UNSUBSCRIBE rbase-l ================================================ TO SEARCH ARCHIVES: http://www.mail-archive.com/rbase-l%40sonetmail.com/
