I know this is off the regular R:Base topics, but I'm posting it to see if any of my fellow R:Base users have had a similar experience and/or can offer a clue or two.
I'm running Windows 2000 with Service Pack 3 on new computer, and I'm having one heck of a time getting my HP 6100 scanner to stay installed. Sometimes when I shut the computer down and then start up again later, it's still there. Other times it uninstalls itself and I have to go to the "Add Hardware" process to set it up again. Needless to say, this is one "royal pain" because before I plan to do a scan, I have to go to the "Hardware Manager" to see whether the HP 6100 is installed, and, if not, to install it. The SCSI card is working correctly and always stays installed; just the scanner "goes missing." Once I reinstall the scanner, it stays for at least that full session, and works properly with the scanning interface program. If anyone can provide me with any clues as to what may be happening -- I'm still trying to figure out W2K -- and/or how to cure this problem, I'll be very grateful. You can reply privately to me at [EMAIL PROTECTED] so as not to clutter up the R:Base list. Thanks!!!!! Dick Croy -- Richard S. Croy [EMAIL PROTECTED] ================================================ TO SEE MESSAGE POSTING GUIDELINES: Send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: INTRO rbase-l ================================================ TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED] In the message body, put just two words: UNSUBSCRIBE rbase-l ================================================ TO SEARCH ARCHIVES: http://www.mail-archive.com/rbase-l%40sonetmail.com/
