Yes. I have done several times, but I still get the MAPI error at the R>
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Albert Berry Sent: Saturday, August 21, 2004 9:20 PM To: RBG7-L Mailing List Subject: [RBG7-L] - Re: Maybe Another Approach With Email. When you installed R:Mail, it set up a group in "Programs" or "All Programs". There is a configuration in there that needs to be done before you can successfully run R:Mail. --- Benjamin Strickland <[EMAIL PROTECTED]> wrote: > At one time I used a code similar to yours but now I get this error message > "Failed To Get Data For Port" when it get to the line to send the mail. This > happens at the R>. > > > > I don't know what this error message is or how to correct it. > > > > Ben > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Albert Berry > Sent: Saturday, August 21, 2004 4:31 PM > To: RBG7-L Mailing List > Subject: [RBG7-L] - Re: Maybe Another Approach With Email. > > > > Here's a code snippet I use > > > > OUTPUT C:\IPQR.mal > > WRITE .vTo > > WRITE .vFrom > > WRITE .vSubj > > WRITE "Format:T" > > WRITE .vreturn > > WRITE .vreturn > > WRITE .vbody > > OUTPUT SCREEN > > SET VAR vrmail = (UDF("@RMail.DLL","C:\IPQR.MAL")) > > > > --- Benjamin Strickland <[EMAIL PROTECTED]> wrote: > > > > > > > > How is it done where the launch "Mailto:xxxx"; command can be used to setup > > > the: > > > > > > Mailto: > > > Subject: > > > BB: > > > CC: > > > Message: With variables from RBase in the Message. > > > Etc. > > > > > > Ben > > > > > > > > > > > > ===== > > Albert Berry > > Management Consultant > > RR2 - 1252 Ponderosa Drive > > Sparwood BC, V0B 2G2 > > Canada > > (250) 425-5806 > > (250) 425-7259 > > (708) 575-3952 (fax) > > [EMAIL PROTECTED] > > > > ===== Albert Berry Management Consultant RR2 - 1252 Ponderosa Drive Sparwood BC, V0B 2G2 Canada (250) 425-5806 (250) 425-7259 (708) 575-3952 (fax) [EMAIL PROTECTED]
