I use VPN with a Cisco PIX and Remote Desktop and with cable access from home there is no "rubber band" effect and RBase is minimally slower than when I'm on the office network.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of R. Scott Stanfield Sent: Friday, October 15, 2004 11:53 AM To: RBG7-L Mailing List Subject: [RBG7-L] - Re: Terminal server Yes, hardware setup is of big importance. We use linux routers on ours and they work very well. The internet provider is important too because the up speed differs from the downspeed. I have heard that many broadband providers have marginally better upspeeds than dial-up. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mark Kwoka Sent: Friday, October 15, 2004 12:04 PM To: RBG7-L Mailing List Subject: [RBG7-L] - Re: Terminal server You can also look into VPN, Also keep in mind that hardware setup plays a very important role here. Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of A. Razzak Memon Sent: Friday, October 15, 2004 11:49 AM To: RBG7-L Mailing List Subject: [RBG7-L] - Re: Terminal server At 11:46 AM 10/15/2004 -0400, John Engwer wrote: >I am using MS Term Server to run R:BASE remotely. I am very pleased with >the speed except when I am transferring files to or from the remote. Is it >just slow for file transfers or do I possibly have something configured >wrong. I use copy and paste to transfer the files. John, Have you looked into FTP or Remote Desktop? Very Best R:egards, Razzak.
