Albert, I am able to duplicate the problem using the ConComp database so I will forward a bug report. I am using a "sum of field" expression to define a variable and it does not calculate properly if you print to a printer after displaying the report on the screen.
John -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Albert Berry Sent: Thursday, December 23, 2004 4:34 PM To: RBG7-L Mailing List Subject: [RBG7-L] - RE: Report printing problem Examine the report very carefully for fields that are outside the band where they are supposed to print. I have had this problem from time to time. I can see the value in the preview, but because the field has a pixel or two outside the band, nothing gets to the printer. Sometimes just clicking on all the filds (while holding the [shift] key) and then releasing [shift] and pressing the [^] key once or twice to move the bottom of the field up a bit, followed by [ctrl] and up or down to make absolutely sure that the field is completely inside the band will do the trick. --- Sami Aaron <[EMAIL PROTECTED]> wrote: > John - > > One other suggestion I have is to remove the variable objects from the > report then place them back there again. On occasion that's worked for > me... > > Good luck - > Sami > > _____ > > From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of John Engwer > Sent: Thursday, December 23, 2004 12:15 PM > To: RBG7-L Mailing List > Subject: [RBG7-L] - RE: Report printing problem > > > > Bob... No change when I uncheck clear VARs > > Dawn. "Blank When Zero" is not checked. I may have to use your > "work-around" and report as a bug. > > > > Thanks for all of your good suggestions. > > Let me know if you think of anything else. > > > > John > > > > > ===== Albert Berry Management Consultant RR2 - 1252 Ponderosa Drive Sparwood BC, V0B 2G2 Canada (250) 425-5806 (250) 425-7259 (708) 575-3952 (fax) [EMAIL PROTECTED]
