Hi Tom, Feel free to call me at (414) 768-8000 x104. Perhaps I can assist you on the phone.
Scott Sherer -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Eldred Sent: Thursday, April 21, 2005 10:25 AM To: RBG7-L Mailing List Subject: [RBG7-L] - Re: SEARCH dymo labels OK, thank you Scott and Razzak for your input on this matter... The labels now print one at a time, but how do i rotate my variables so that they print correctly on the form? My variables are ok, in that they appear in multiple other reports and labels--but here are my results. With label settings in RB7 set to portrait & printer set to landscape, Data displays correctly, but i get one inch of three labels printing per label With RB7 set to portrait and printer set to portrait, I get the same results.**see example below With RB7 set to landscape & printer set to landscape, I get no data displayed in designer, preview or print. I hope the simple solution is that i am retarded and missing something obvious. thank you tom ** 3 labels per page example | your nam| | your add| | your city| | | | next nam| | next add| | next city| | | | next nam| | next add| | next city| | | ----- Original Message ----- From: "A. Razzak Memon" <[EMAIL PROTECTED]> To: "RBG7-L Mailing List" <[email protected]> Sent: Friday, April 08, 2005 9:05 AM Subject: [RBG7-L] - Re: SEARCH dymo labels > At 08:50 AM 4/8/2005, Thomas Eldred wrote: > >>Good morning and my apologies if this posts--trying to look for >>instructions on making the Dymo Label maker to work with RBASE. >>...I know i saw this posted. > > Tom, > > Here you go ... > > To print one label at a time on roll, you would need a printer to > support labels on a roll, such as DYMO LabelWriter 330 Turbo-USB. > > If that is the case, then, first you need to setup the printer > and then use the "Custom" Paper Size option of Label > Page Setup. > > Here are a few tips (based on my experience using Dymo LabelWriter > with "R:Capture", the first vertical market RBG7 application): > http://www.rcapture.com > > 01. By default, the Dymo Label Printer is installed for "Portrait" > Printing. You need to change the printer default to print as > "Landscape". > > Here's how: > > If installed properly on Windows 2000/XP Workstation, you > should be able to see the DYMO LabelWriter 330 Turbo-USB as > one of the listed printer in Windows Printer Configuration > Panel. > > Start | Settings | Printers > > You'll need to update the Printing Preferences of DYMO > LabelWriter 330 Tubo-USB printer as following: > > 01. Right-Click on DYMO LabelWriter 330 Tubo-USB printer icon > 02. Select Printing Preferences... > 03. Change Orientation to Landscape > 04. Click on [Advanced] button for Advanced Properties > 05. Change the properties as following: > Paper Size: 99014 Shipping > Copy Count: 1 Copy > Advanced Printing Features: Enabled > Halftoning: Super Cell > Printer Quality: Barcodes and Graphics > Print Quality: Normal > > Click on [OK] when done > > 06. Click on [Apply] button to save and then click on [OK] > to save Printing Preferences. > > 02. Once the printer is setup accordingly, now you can use the > R:BASE 7.1 for Windows Labels to print one label at a time > on a roll! > > 03. Use "Custom" option to set the height and width of label. > > That's all there is to it. > > Enjoy and make sure to have fun! > > Very Best R:egards, > > Razzak. > > --- [This E-mail scanned for viruses by Declude Virus]
