|
Thanks Javier
If I used LP5 somewhere it �was a typo. The mapping is correct (checked about 5 times and double cheked, so 99,98% sure) and by NET USE I get (In Swedish) Nya anslutningar sparas f”r kommande arbetspass.
Status������ Lokal���� Fj„rr�������������������� N„tverk
------------------------------------------------------------------------------- Inte tillg„n M:������� \\lenas\lenac������������ Microsoft Windows-n„tverk OK���������� R:������� \\192.168.16.7\kontema_r� Microsoft Windows-n„tverk OK���������� S:������� \\192.168.16.7\kontemadb� Microsoft Windows-n„tverk Inte tillg„n T:������� \\192.168.8.2\delad������ Microsoft Windows-n„tverk Inte tillg„n W:������� \\192.168.8.2\delad������ Microsoft Windows-n„tverk Inte tillg„n X:������� \\wasacpu2\croot��������� Microsoft Windows-n„tverk Inte tillg„n Y:������� \\192.168.8.2\droot������ Microsoft Windows-n„tverk OK���������� LPT5����� \\192.168.16.35\hp4250��� Microsoft Windows-n„tverk Kommandot har utf”rts.
The LPT5 is on my laptop using IPnumber �and a second printer instead of \\KFS11\HP4200 as in previus mail. The reason laptop its different then desktop is it simplifies things when I work over a VPN.
It is the same code running of older PC as on new PC. OLD PC works NEW PC does not!
The only thing I can guess on is that my OLD pc has got service pack 2 of XP as an update, the new ones where factory installed service pack 2.
Somehow I believe there is service somewhere no longer started as a default, but If that is the case I cant figure out where.
Gunnar Ekblad
-----Ursprungligt meddelande-----
Gunnar: How are you capturing your printer port? Are you using “NET USE…” or using the printer properties or both? Also, verify that you are using the correct mapped port name, i.e. LPT5 instead of LP5 (been there, done that…) After you capture/map your printer, try OUTPUT LPT5 *( or whatever your printer port is) WRITE ‘test” NEWPAGE OUTPUT SCREEN If it print correctly then your capture/mapping is working, if not, then you need to recheck the mapping/redirection. Javier,
Javier Valencia, PE President Valencia Technology Group, L.L.C. 14315 S. Twilight Ln, Suite #14 Olathe, Kansas 66062-4578 Office (913)829-0888 Fax (913)649-2904 Cell (913)915-3137 ================================================ Attention: The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.� Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all system and destroy all copies. ======================================================
-----Original Message-----
Help !
Sorry to ask help I think is more XP related then RBase Running RBDOS7 on XP I have now for a long time made my reports to a listfile and then copy to printer by using something :
Out Mylist.txt Print Myreport Out terminal ZIP CMD /C COPY Mylist.txt LPT5 *(or whatever I happened to map my network printer \\KFS11\HP4200 to)
On 2 brand new ( 5 days and. 2 hours) PC that does not work any longer,
If I open a command window on this new PC and type Copy Mylist.txt LPT5 *( It hangs ) If I type: Copy Mylist.txt \\KFS11\HP200 *( It copies to printer)
If I try that working method from Inside rbase using ZIP CMD /C COPY Mylist.txt ‘\\KFS11\HP4200’ *( It works )
Do I need to use that syntax from now on or can someone tell me how to change my XP Configuration on only these 2 brand new PC so they behave as my older PC do?
I can ADD that this ‘New’ (or whatever I should call it) syntax works from older XP as well
Part by part this will in due time be rplaced by 7.5 Windows, but I guess some DOS part will remain for some time. Gunnar Ekblad
|
