They have RunTime. No packing going on.
I did as you said--- used an RB1 file from a couple of days earlier.
The one time you are glad your customer hasn't done a Reload and throw off the first/last rows in tables. A couple of temp files and my app file were stuck open even with no one in RBase.
Being a holiday, it looks like someone was "doing something" on the server with the data base open.
...
At 05:51 PM 9/8/2005, you wrote:
Did the client attempt to pack in place? This is a very dangerous procedure,
to be taken only in case of dire emergency. Reload is MUCH safer. If you are
in v7, your can put an ON BEFORE PACK file in there that will abort the PACK
before it even starts.
I expect you know how to recover from this using an older copy of the RB1
file.
--- Dennis Fleming <[EMAIL PROTECTED]> wrote:
> RB7.1
>
> At a customer yesterday, their File One size went from 38kb to 0kb.
>
> If the server is OK then I suspect that it must be a network card or
> cable(???).
>
> Their IT guy says it "must be the software". Since there are only three
> users, I suggested they move the data base to a local standalone "C" drive
> until they find the problem.
>
> Any other suggestions?
>
> TIA,
>
> Dennis
> *****
>
> Dennis Fleming
> IISCO
> http://www.TheBestCMMS.com
> Phone: 570 775-7593
> Mobile: 570 351-5290
>
>
Albert Berry
Management Consultant
RR2 - 1252 Ponderosa Drive
Sparwood BC, V0B 2G2
Canada
(250) 425-5806
(250) 425-7259
(708) 575-3952 (fax)
[EMAIL PROTECTED]
Dennis Fleming
IISCO
Phone: 570 775-7593
Mobile: 570 351-5290
