Oh! I forgot to mention that these are mounted on a Tange 107mm bottom
bracklet and they are tight with no wobbles or squeaks. I've never had
a 'pedal hit' on a corner either so...........while pristine they are
hopefully decent. I can photograph them up close and email too and I
think that might be a good idea both ways regardless.

On Mar 2, 7:39 pm, charlie <[email protected]> wrote:
> I have 170mm XD600 cranks and wanted to switch to 175mm arms. What
> about trading out just the arms? I like my 24 tooth inner. I only have
> about 2000 miles on this crankset if my estimates are correct. I think
> mine are scratched a little by the pedal threads where they get gaffed
> once in a while pushing my bike up my front steps. You can see these
> cranks on my Surly on my myspace page under my profile.
>
> On Mar 2, 3:42 pm, scott <[email protected]> wrote:
>
> > Hey All,
> >    I was wondering if anyone wants to swap an XD-600 (XD-2) crank in
> > 175mm arm length for the exact same crank with 170mm arms? Mine have
> > the 46-36-26 rings, they are 3 years old, the logo is worn off, but
> > they aren't all scratched up, and the rings have a lot of life left in
> > them. These cranks will last a long, long time. Anyway, I have 175's
> > on all my bikes right now and I've been doing a lot of 100 mile plus
> > rides lately and would like to try riding with shorter arms on at
> > least one bike, but alas, I don't have the money to sink into a new
> > crank right now. Hence the swap idea. Hopefully someone is interested.
> > If you have something that isn't exactly the same, but comparable,
> > let's talk.
> > Scott Lutz
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to