I found it a bit tougher than that because the Dimension adjustable stem is at 90 degrees for maybe 40 cm to the pivot point. That's where the stem angle adjustment begins. I've thought I could easily measure, get the length and angle right but, 2 stems wrong later, I'm a bit spooked. Seems like I could just follow center to center on the stem as it is, ascertain the angle, and go. I'll try again...tired of paying for shipping for the moment.
On Aug 11, 4:01 pm, Patrick in VT <[email protected]> wrote: > On Aug 11, 2:06 pm, avillage <[email protected]> wrote: > > > I also have a Dimension adjustable stem elevated to somewhere >around 120 > > degrees that I want to swap out with a VO 117 degree >stem. If I have the > > courage...it took me quite a while and a couple >of stems to dial my bike > > in. > > you're using a threadless adapter, correct? so can't you just adjust > your adjustable stem to the same angle as the VO stem, raise/lower the > stem adapter accordingly, then swap out the adjustable for the > appropriate length VO stem? > > sounds like you're in a position to try before you buy, no? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
