El Kickstand is marked with bb heights. If you measure BB height on a non-tilted bike, you can cut at the mark. Cut at an angle, just as the mark is. Here, we use kickstand feet, which add length, and so...if you measure bb at 270mm and plan for the foot, cut 270 minus 10 to 12mm = 258 to 260. Then with the foot, should be fine.
Any length will be optimized for a certain slope or no slope at all; and then there's the turning of the h'bar that raises or lowers the bike. Forest-dwellers will prefer a longer length to account for some sinking in the loam, and so on. G On Aug 31, 11:19 pm, 40_Acres <[email protected]> wrote: > I'm about to install a Pletscher single kickstand on my 57" AHH (with > the kickstand plate), and it looks a bit long to me. Has anyone had > to cut one of these stands down to size? If so, how much did you > cut? Thanks in advance! > > Michael --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
