Very nice! And you have the self satisfaction you made it yourself and it didn't cost you an arm and leg. I would like to see how you attached it to your saddle also. Is that a B17 select saddle?? On Saturday, September 27, 2014 5:12:41 PM UTC-6, jar351 wrote:
> I was pretty psyched when I bought a used Saddlesack bag from a fellow > poster here last weekend. My partner was not. She thinks I spend too much > of my very little money on bike stuff--for the record, she's right--and > besides that, we live in Oakland. So perhaps understandably she responded > to my boyish excitement with a look that said, "you *know* that's way too > f-ing fancy and it's *going* to get stolen." I retorted that I planned to > attach it to my bike with a piece of bike chain and a crap load of zip > ties, but still she was unfazed. Those things would not stop a thief. As > much as I hated to admit it she was right. That's when I decided to the > opposite tack: make the bag super *easy* to detach and carry. I know that > Riv sells a Nitto-made doohickey for just such a purpose, but come on, > $100? That's almost as much as I paid for the friggin bag. > > Anyhow, that's how I ended up making this thing: > > > <https://lh5.googleusercontent.com/-pz2jSRSID5M/VCdBEfiAUWI/AAAAAAAAB5E/Sch1951fkR4/s1600/IMG_5445.jpg> > For the record, yes, I blatantly copied the Nitto design as much as > possible, and took some cues from another DIYer who had made the same kind > of thing and posted it on Flickr. I couldn't figure out the attachment > mechanism of the Nitto mount from the photos on the Riv site, so I just > made a back plate and sandwiched the saddle rails between it and the main > plate that you see in the photo. Seems to work well enough so far. > > The body of the mount I made from aluminum flat bar, so I'm sure it's not > as durable as the Nitto one, which I assume is steel, but how strong does > this thing need to be? The tube that the QR skewer goes through is just > 1/2-inch PVC but I decided to wrap it in bar tape to avoid the toilet paper > dispenser look. > > I made this in a few hours with no power tools except an ancient > Black&Decker drill and if you don't count the cost of the drill bits and > tap (which I wanted to have anyway), the whole mount cost me about $15 to > make. Most of that was the cost of the aluminum flat bar, of which I have > plenty leftover for other projects. (I already had the QR skewer from I > don't know where.) Anyway, it was a fun project, not just about saving a > little dough. > > More photos on Flickr: > https://www.flickr.com/photos/37784914@N02/sets/72157647694465480/ > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
