I've been riding with a White Industries VBC crank on my Atlantis since the spring and it's been great, except for one nagging thing. The large ring doesn't seem to be dead straight/flat. If I look down at the chain ring while I am pedalling, I can see it moving from side to side in between the front derailleur. That means it is really hard to trim the front der. and not get any buzzing from the chain scrapping against it. It has to be *JUST* right to not contact.
Now I have some single speed White rings and they are all dead straight. So I'm curious... could it be the cheapo BB I have (It wasn't even 10 bucks. bought it to test the spindle length and decided to ride it till it died. Turns out it's quite tough!), or do White rings have a certain amount of flutter? It's about 3mm of total side-to-side movement I'd say. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
