Thanks everyone! Andrew, exactly the answer I was looking for, thanks! On Monday, June 8, 2015 at 12:51:09 PM UTC-7, Andrew Drummond wrote: > > Rivnuts for M5 screws have a 7 or 7.5mm OD, while you'd use a 1/4" > (6.35mm) drill for a brazed in boss, so yes - a hole made for a rivnut will > be too big to braze a boss into later. You could make a custom braze-on > boss, but it's probably not worth the hassle. Correctly installed rivnuts > work very well, and as has been pointed out, you'd have to figure out how > to get them out of the tube should you choose to remove them later. How > difficult that is depends on how big your vent holes are! > > Andrew
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
