The hardware store P-clamps will rust. Are the higher end ones stainless steel?
On Tue, Jun 16, 2015 at 9:53 AM, Anton Tutter <atut...@gmail.com> wrote: > No concerns. The P-clips come plasti-dipped, and additionally I used a > strip of that rubber shim material from Blinky mounts. You can kind of see > them if you look close enough in those pics. > > Anton > > > On Tuesday, June 16, 2015 at 8:58:23 AM UTC-4, Matthew J wrote: >> >> > I agree that the Riv solution works well, since I've successfully used >> this method on a bike with no eyelets. But why pay $11 for a pair of heavy >> duty band clamps when much cheaper P-clamps ($2/pair) do >> > the same thing and cost a fraction? >> >> Hardware store variety? Any concerns with marring the paint? >> > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- Keep the metal side up and the rubber side down! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
