I got one of the clamp on mounts from ebay (Moose Racing). Currently I've got my Sam set up as a 1x9 with a single Paul thumbie on the stem, but when I had it rigged as a 2x9, I put a single layer of 3M packing tape on the inside of the Moose Racing clamp, then mounted it to the downtube using the brazed on cable stops as backstops. Silver/Dia Compe shifters or Dura Ace downtube shifters work work great.
On Tuesday, August 11, 2015 at 10:33:21 AM UTC-4, Lungimsam wrote: > > If I want to try DT shifters on my blue Sam, how do I do that without > tearing up the paint on the DT with a boss clamp? > > Also, is there some formula to calculate where to place the bosses on the > DT? > > Too bad the frame didn't come with bosses. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.