I'm with Edwin. I have P55s on mine with 48mm tires (not quite 2"). They 
fit easily and look great, but I too could've fit the P65's and I'm getting 
some splash out the side in stouter puddles since the tire fills so much of 
the fender. If I was doing it again, I'd get the 65s. Just be sure and read 
Riv's note about the one fender not being defective because it's got a 
space cut out of it, that's just part of the fender at that size to fit the 
frame.

Rather than rubber plugs at the kickstand plate I just used a longer bolt 
with a few nuts on it to split the spacing difference between getting the 
wheel out and maintaining my fender line. On the 52cm I had to bend the 
mounting tab on the rear fender's positionable bracket to match the angle 
of the seat stay bridge's boss. Didn't really have another troubles getting 
them in there, massive fender clearance is one of the Clem's strengths 
after all ;)

On Thursday, November 19, 2015 at 2:20:30 PM UTC-5, Edwin W wrote:
>
> If you are thinking of getting the SKS fenders that Riv sells: On the little 
> Clem 
> <https://www.flickr.com/photos/90785999@N06/albums/72157661094042625/with/22756172020/>
>  
> I built up, I put p55s on there with Panaracer Pasela 26x1.75. I know it 
> will fit p65s, so I think I would suggest those, unless you are planning on 
> running relatively small tires, like mine, or smaller
>
> As far as the mounting, I have a spacer (just a rubber plug I drilled a 
> hole in) in between the fender and the kickstand plate and another one in 
> between the fender and the seat stay bridge.
>
> Edwin
>
> On Thursday, November 19, 2015 at 12:10:36 PM UTC-6, Jonathan in Ri wrote:
>>
>> I have a Clem arriving tomorrow.  Can anyone recommend which model fender 
>> will work the best? Will the longer chain stays affect mounting? 
>>
>> Thanks
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Reply via email to