Thanks Jason. The Sheldon Brown bottom bracket page lists a 115.5mm shimano un73 and 2mm spacer for the Sugino AT. Is that really going to work?
http://www.sheldonbrown.com/bbsize.html That gives a 42.5 chainline. I wish I knew more about this stuff but I'm learning. On Dec 10, 11:06 am, Jason Hartman <rjasonhart...@gmail.com> wrote: > On Thu, Dec 10, 2009 at 9:54 AM, Jon Grant <jgr...@papagrant.com> wrote: > > Cycletex asked: > > > What spindle length are you looking for and are you going by the Sheldon > > Brown suggestions for the AT? > > > ------- > > > I put a Sugino AT on an old Schwinn World Voyageur last summer. The longest > > BB I could find was 122.5, and I had to dent the chainstay to clear the > > granny ring. (A neighbor walked over and said, “Wow. I’ve seen you do a lot > > of things to bikes, but I’ve never seen you use a hammer. Bad day?”) > > > A 125 or maybe even a 127 would’ve worked better, I think. > > Since this question comes up from time to time, I just measured the OE > bottom bracket for Sugino AT triple cranks. > It's 125mm with a 9mm driveside offset. > > Jay Hartman -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
