Hi Jack,

I tried sending you a PM regarding the ST crank. Don't know whether you got 
it or not? Can you shoot me a email.

  Los Angeles, CA

On Wednesday, October 12, 2016 at 10:33:09 AM UTC-7, Jack K wrote:
> Hi Riv-folk,
> As part of my continuing efforts to turn excess bike bits into rent ...  Lots 
> of premo stuff here for your consideration!
> All prices are "+ shipping", where shipping will be a best guess rounded 
> to $5. Figure $10 for saddles, $15 for panniers and $30 for wheels within 
> the ConUS. Some things shown in photos, some found after photos taken. 
> Happy to supply images on request!
> *Bags and racks:*
>    - *NEW Carradice Super-C Saddlepack**:*  
>    Mounts to saddle rails, not the transverse style of Carradice bag. 
>    Black waterproof cotton duck, lotsa reflective material, 8 liter capacity, 
>    This guy: http://tinyurl.com/gwy4mny   *$65*
>    - *NEW MUSA Madden Buzzard Rear Panniers:* 
>    High quality bags sewn in Boulder, CO, I believe the last generation 
>    of Madden pannier. Purchased from Adventure Cycling website ($200 in 
> 2006), 
>    but never used. High visibility gold/black color combo. Uses a locking 
>    attachment system that wraps completely around the rack rail, similar to 
>    Ortlieb, but you engage the lock with the flip of a finger. Lots of 
>    standard and mesh pockets for organizing & drying damp gear, reflective 
>    strips for visibility. A great bit of rugged American made kit! This guy 
>    here: http://www.suburbancyclist.com/madden.html    *$165*
>    - *NEW Tubus Cosmo Stainless Rear Rack** (with low rider mounts):* 
>    Installed, then removed without ever having a pannier mounted on it. 
>    Original version of the Cosmo, so looks like this: 
>    http://www.therandonneeshop.com/medi...ubus_Cosmo.jpg 
> <http://www.google.com/url?q=http%3A%2F%2Fwww.therandonneeshop.com%2Fmedia%2F238%2FTubus_Cosmo.jpg&sa=D&sntz=1&usg=AFQjCNEnNw7prcaEYDOtEWlcoHy57VAwag>
>    Included is the $13 Tubus "Lower Rack Mounting Kit", which can be used to 
>    position the rack slightly further back to increase clearance for heels or 
>    disc brakes, or help on bikes with shortish chainstays. Paid $210+$13=$223 
>    at TheTouringStore.Com; say *$160* for everything.
> *Wheels and Tires:*
>    - *Schmidt SON28 Dyno-hub Tandem Wheelset (10/9/8/7 Spd Shimano):* 
> All silver, 700c, 36 spoke Schmidt classic front hub, 40 spoke DT/Hugi 
>    tandem rear hub (threaded on left for drag brake), Velocity Dyad rims, 
>    spaced 145 mm OLD (modern non-Santana tandem standard). Bought on list 
>    or eBay (can’t remember) a few years ago to build my ultimate BOB-ish 
>    tandem, then never used. Original owner stated they were built by Peter 
>    White and had less than 1000 miles. I can’t confirm that, but build and 
>    condition seem consistent. Look good to me, but assume they’ll need a 
>    touch-up truing (my assumption with any used wheels). No skewers. Cost 
>    considerably more than $800 to build,   *$525.*
>    - *NEW 26” (559) XT M760 / Mavic 717 Wheelset (V-Brake, 10/9/8/7 Spd 
>    Shimano):* 
> All silver. Purchased from one of the big online retailers (Colorado 
>    Cyclist most likely) back in the 9 speed era when XT M760 was current, but 
>    never used. When received I did mount a cassette and two different tires 
> to 
>    test the fit of the tires in my touring frame, then hung in my garage for 
> a 
>    decade. Silver XT M760 hubs, 32 stainless butted spokes front and rear, 
>    light/expensive Mavic XC717 rims, original silver XT skewers, tags still 
>    attached.   *$275*
>    - 
> *Grand Bois Cypres Tires (a pair of 700c x 32): *Purchased from a fellow 
>    iBOB, but never used. Tread shows no visible wear, but sidewalls dirty, so 
>    I assume they've been ridden a bit. These guys: 
>    http://tinyurl.com/gw9ptln   *$65*
>    - *NEW Hutchinson TopSlick Tires (a pair of 26" x 1.2" or 559 x 31mm):*
> New, still in packaging. One tire was test mounted, but never ridden. High 
>    thread count (127 tpi) tires with flexible sidewalls. 340 grams / tire, 
>    including the packaging.  *$35*
> *Components:*
>    - *NEW-In-Box Dura-Ace 9 Speed Bar-End Shifters:* 
> Bought for (yet another) project that didn’t happen. This is the full kit, 
>    with shifters, pods, cables, pre-cut cable housing, BB guide and down-tube 
>    cable stops. Everything that’s metal is beautifully polished alloy. These 
>    ones here: http://www.rivbike.com/product-p/sh2-9.htm   *$85*
>    - *NEW-In-Box Schmidt SONdelux:* 
> 32 hole, polished, rim brake model, 100mm width, includes bolt-on skewer – 
>    everything exactly as it comes from Schmidt. Purchsed from Boulder 
> Bicycles 
>    where it had been built into a wheel, then immediately unbuilt again when 
>    customer changed his/her mind. Zero use on this, but very slight marks on 
>    flanges from spokes. A really beautiful bit of kit! This is it: 
>    https://www.compasscycle.com/shop/components/hubs/sondelux-generator-hub/  
>    *$225*
>    - *NOS SunTour XC-Pro Crankset:*
> 100% original, never mounted beauty! 170mm, stock 46/36/26 SunTour 
>    PowerRings™, JIS taper. Cold forged, meticulously polished (even the 
> backs) 
>    and anodized. They don’t make them like this anymore – literally. Like 
> this 
>    one (but with stock granny ring): http://tinyurl.com/jf6zo9g Note, 
>    these make a great double, just remove the granny and its’ spacers. 
>    Anodizing on middle ring slightly faded.   * $225*
>    - *Nitto 185 Handlebar (26.0, 42cm, “Mark’s Bar” shape):*
> Take-off bar purchased from Belmont Wheelworks Annex about 15 years ago, 
>    but never used. Was packaged as new, but scratches & tape residue on bar, 
>    some marks on center section. Not for your best bike, but 100% functional. 
>    Same shape as current “Mark’s bar” (82mm reach, 135mm drop), but 325 
>    gram weight. See: http://tinyurl.com/zy4zxa8   *$38* 
>    - *Modern Shimano Brake-only Levers:* 
>    Same as the Tiagra levers on Riv's website, but the Tiagra's light 
>    gray plastic bit between the hood and the alloy lever blade is a much 
>    better black on these (I believe these were marketed as Ultegra, but Riv’s 
>    site seems to say they’re Dura-Ace). Look here: 
>    http://www.rivbike.com/product-p/bl1.htm Alloy lever blades are pretty 
>    much perfect, but hoods showing light wear from use. (Hoods $13 from Riv) 
>     *$30* 
>    - *NEW Nitto Handlebar Shim (25.4 **à*
> * 26.0): *Stainless steel shim still sealed in original package.  *$8*
> *Saddles:*
>    - *NEW Brooks B15 Swallow Titanium (Brown):* 
>    Titanium rails, no box, new saddle on display card, no other 
>    paraphernalia. This one: http://tinyurl.com/jxflswg   *$265    *(Add 
>    matching Brooks microfiber bar tape for *$20*)
>    - *NEW Brooks B15 Swallow Titanium (Honey):* 
>    New-In-Box, titanium rails, includes spanner, paperwork, etc…. This 
>    one: http://tinyurl.com/jxflswg   *$285    *(Add matching Brooks 
>    microfiber bar tape for *$20*)
>    - *LN Brooks C13 Ultralight Carbon Framed Wunder Saddle:*
> Carbon framed 258 gram Brooks with the springy, hammock-like Cambium feel! 
>    Used on a couple of short test rides. Indistinguishable from new, even to 
>    my notoriously picky eye & tail-section! This one here: 
>    http://tinyurl.com/h7fcvoh     *$170*
>    - *EC+ Ti Fizik Arione Classic:* 
> All black, titanium rails (248 grams on my scale), used on two rides, 
>    certainly less than 75 miles total. Pretty much indistinguishable from 
> new, 
>    except for slight loss of “Arione” lettering screened onto side of saddle 
>    from thigh rub. Was suggested on iBOB a few years back, but didn’t work 
> for 
>    me. This one: http://tinyurl.com/hpy9x5a    *$75 *
>    - *EC Ti Fizik Aliante Carbon Twin Flex:* 
> All black, titanium rails and carbon shell with carbon/gel trampoline for 
>    support (246 grams on my scale), this precise model doesn’t appear to be 
>    available anymore. Highly recommended on iBOB and actually worked very 
> well 
>    for me over a few hundred miles of use, but I’m using other things now. 
>    Very slight marks on rubber side bumpers, no other obvious signs of use 
>    except some loss of “Aliante” lettering screened onto side of saddle from 
>    thigh rub.   *$75 *
> *Post Ride Refreshment:*
>    - *NEW YayLabs! Ice Cream Maker Ball:* 
>    Brand new and in the original box, Yaylabs! Play & Freeze Ice Cream 
>    Maker makes a quart of ice cream as you or the kids roll it around. Great 
>    fun for kids (of all ages!) at parties or picnics. Uses no electricity, so 
>    can be used anywhere there's ice; i.e. camping, picnics, boating, at the 
>    playground, etc ... 
>    This is the updated "Mega" size ball, that makes a quart of ice cream, 
>    rather than the original ball's pint. Highly rated with 4.5 stars out of 5 
>    on Amazon:
>    https://www.amazon.com/Yaylabs-Cream-Ball-Blue-Quart/dp/B009GFKPDM
>    Video review of the ice cream ball in action:
>    https://www.youtube.com/watch?v=z4t3SWKYWCE
>    Received as gift, but never used. *  $20 + shipping*  
> Cheers and safe riding!
> -Jack
> Raleigh, NC 

You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Reply via email to