My 1995 Road Standard was built to 128 mm spacing to accommodate either 126 or 130 mm hubs. I believe they were all that way. Double check your spacing with an accurate caliper, if it's 128 I would just install a 130 wheel and be happy.
Bill Stockton, CA On Saturday, November 12, 2016 at 4:36:10 PM UTC-8, Matt Beecher wrote: > > I have a Rivendell Road Standard that I really like, but I am disappointed > with the current wheelset. The stays are currently spaced at 126 and > normally I wouldn't hesitate to spread them to 130mm to open up more > options, but I fear what I have read about 753 tubing. On the other hand, > I have read that the Road Standard used thicker tubing than most 753 > frames, so I wonder if this makes it more suitable to spreading...or less > so. In short, has anyone here spread their R.S. stays and used them > without failure? > > Thanks, > Matt B. > Oswego, IL > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
