I have one or two IRD two bolt zero setback posts in 27.2 that I'd gladly trade your Nitto seatposts for...
On Jan 13, 9:22 pm, James Warren <jimcwar...@earthlink.net> wrote: > I'm a seat-forward Rivendell rider person, and I just recently found out. It > freaked me out a bit, because I have a few of them with setback Nitto > seatposts, and so far, I've only switched to the Thomson on the Ram with good > results. I want a good silver seatpost for the other bikes too, so do I need > to spring for Thomsons on those? I'm thinking about just flipping the Nittos > around backwards. Will this cause problems? > > -Jim W. > > > > -----Original Message----- > >From: "Frederick, Steve" <frede...@mail.lib.msu.edu> > >Sent: Jan 13, 2010 11:50 AM > >To: rbw-owners-bunch@googlegroups.com > >Subject: RE: [RBW] Re: A Bit More on the RBW/SOMA San Marcos/Amos > > >Steve Palincsar wrote: > > >>The difference between 72 and 73 degrees should easily be accommodated > >>with a zero-setback post. Are you saying you are already using one of > >>those with a 73 degree seat tube? > > >I am--my "ideal," seat tube angle with the saddle I typically use is 73.5. > >That assumes a zero-setback post with the saddle rails centered. So I'm on > >the steep side for a Riv rider! > > >Steve "short thighs," Frederick, East Lansing, MI- Hide quoted text - > > - Show quoted text -
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
