Well thank goodness for that at least ! As for the nut Ash, as long as the nut screws on as it is supposed to: as in *easy peasy*, the steering tube threads will always be fine regardless of the material.
On Monday, April 24, 2017 at 12:41:01 PM UTC-4, Ash A wrote: > > Folks, > > thanks for sharing your opinions. To clarify, some of the LBSs did have > 32mm wrench, but not for sale. They had 34, 36 and 40mm wrenches in stock. > > The aluminum would be probably better for the life of the fork, as if at I > over tighten, there is no chance of damaging the fork. > > I'm going to give it one try to find a good 32mm wrench and use aluminum. > If that too changes the shape of the nut I'll just swap it to steel. > > -Ash > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
