I've been bitten by this as well. I tried lots of things, including teflon tubing which would eventually just ride up the bottom bracket until it was no longer helping. Annoying. Eventually I gave up and ground off the grooves so I could install an actual cable guide.
Best, William On Thursday, June 8, 2017 at 1:45:03 PM UTC-7, AJ wrote: > > For what it's worth > > I take pieces of left over derailleur housing and cut away the plastic > cover then remove the wires leaving lengths of teflon tubing. > > I do like to use this teflon tube under the bottom bracket. > > Arnold > > On Wednesday, June 7, 2017 at 6:44:13 PM UTC-7, Belopsky wrote: > >> I have a Toyo built Atlantis - there are guides for the shifter cables >> and that is it. Do I just run them in-between them? > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
