The rear brake bolt is tangential to the tire diameter, so the brake-tire distance increases as the brake gets farther away from the brake bridge. The front brake bolt, because of the fork offset, is not tangential, and the brake-tire distance gets smaller as the brake gets farther forward of the fork crown. Fork crowns are thicker than brake bridges, so there is less brake-tire clearance in front than in back. The difference is non-trivial. A constucteur tasked with building a fork for a bike that will have dual-pivot brakes would do well to angle the bottom of the steerer and fork crown and drill the brake bolt hole such that it is tangential to the tire circumference.
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.