It can be made perfect with the proper width bottom bracket. On Thursday, November 16, 2017 at 9:34:20 AM UTC-5, Belopsky wrote: > > So if I understand correctly the chainline may not be perfect but close > enough? > > On Thursday, November 16, 2017 at 9:20:14 AM UTC-5, lconley wrote: >> >> NOS Campagnolo Record Hi-Lo Hubs. They made a couple of runs of these in >> the seventies. Fairly rare. The rear is a wide six at present, I have a new >> 5 speed Campy axle and a variety of Campy axle spacers that I will use, >> >> In the past, I have just put a single speed freewheel on a 5 speed hub >> and the proper BB on a single (or converted double) crank, no spacers >> needed. >> >> Laing >> >> On Thursday, November 16, 2017 at 9:09:38 AM UTC-5, Belopsky wrote: >> >>> What are these? >>> I have a set of Campy hubs (rear needs a new axle) - can I use that to >>> build a single speed wheelset? Would require some spacing to make the >>> chainline work right, right? (since this is a 5/6 speed 120mm hub?) >>> >>> On Thursday, November 16, 2017 at 8:33:29 AM UTC-5, lconley wrote: >>>> >>>> I have been saving these for a few years, I think a single speed would >>>> be a good place to use them. >>>> >>>> Laing >>>> >>>> >>>> >>>> <https://lh3.googleusercontent.com/-QcS1cVkB5a8/Wg2TaP0eHsI/AAAAAAAAAFY/FyX8uEhigI8uScLXfMCRYhZY-xxh0XRqwCLcBGAs/s1600/IMG_1615s.jpg> >>>> >>>> >>>
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
