Thanks Bill. Basically a must have with a Paul front brake! I wanna get some remade for the rear!
On Thursday, March 15, 2018 at 6:31:04 PM UTC-4, Bill Lindsay wrote: > > The nice touch that caught my eye is the Dia Compe headset cable hanger > with a built in QR cam. That's a classy old school unit. APPROVE. > > Bill Lindsay > El Cerrito, CA > > On Thursday, March 15, 2018 at 12:00:46 PM UTC-7, James / Analog Cycles > wrote: >> >> We just about finished up this Sam Hillborne for John S. He'll use it >> primarily for commuting, but also for the occasional light tour. It's got >> a bunch of Riv un-approved bits, but here at Analog we're pretty fond of >> tubeless tires, bigger than VP pedals, and 1x drivetrains. Of course, not >> every bike goes out with that stuff! >> >> It's about to get a trouser guard for the outer chainring, as well as a >> Big Nitto rear rack. >> >> For gear inch nerd: it's roughly 85 on the high side and 18.7 on the low >> side. 36t ring. >> >> >> <https://lh3.googleusercontent.com/-YQAGCVH8jm0/WqrCj8mIdJI/AAAAAAAADzM/D8ZtuQzK1GY1E_6nrTYSovLLK_gXs9zKQCLcBGAs/s1600/LRG_DSC05549.JPG> >> >> >> <https://lh3.googleusercontent.com/-XBsGYg_-N_k/WqrCpldBPyI/AAAAAAAADzQ/Eikqd8FtE-k3o4Nvsv59FWH3O3s2or-aQCLcBGAs/s1600/LRG_DSC05550.JPG> >> >> >> <https://lh3.googleusercontent.com/-Atjfx92_yY0/WqrCu1FC2LI/AAAAAAAADzU/sHvXLB57IG8ZzEj3oVvKHiNc-gf6MISdgCLcBGAs/s1600/LRG_DSC05561.JPG> >> >> >> <https://lh3.googleusercontent.com/-HervwSpOCiE/WqrC1bQNvOI/AAAAAAAADzY/W2EQTXXESN41npsTS97DSHTkRLttK1oBQCLcBGAs/s1600/LRG_DSC05569.JPG> >> >> >> >> >> >> >> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
