Anything can make a bike go click but for me it's usually one thing: the bottom bracket isn't snug enough. Grant mentioned this already and I concur.
Almost every bike I've owned this has popped up, and usually right after I've installed the BB. I've even used a bit of teflon tape on really stubborn cases. A breaker bar helps to install snugly. Not so you can gorilla it, but so you can apply more force in a controlled manner. The giveaway that's it's the bb is that the creak is intermittent and usually prompted by standing, either to mash up a hill or get underway from a stop. It goes away under easy pedaling/less torque. A loose crank arm is similar but it makes a creaking noise instead of a click. Pete Arlington, VA -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
