Try a thinner M6 Nordlock from fastenall - https://www.fastenal.com/products/details/0129503
On Thursday, June 21, 2018 at 3:51:47 PM UTC-5, Reed Kennedy wrote: > > Not if it works without it, in my opinion. > > I've both used and not-used them. Problems I've had when not-using: > 1) Pads run in to fork blades, because the caliper is nearer the fork. > 2) Threaded rod that bolts the caliper to the fork crown sticks out extra > in the back. That's more of a problem with a recessed setup, because it can > keep your allen key from extending deep enough in to the nut to provide > good torque. > > The obvious problem of caliper rotation isn't actually much of a problem, > as the caliper is mostly self-centering when set up correctly. > > OTOH, they only cost $1 or so at your LBS, and you are *supposed* to have > one. I've now added them back to all the bikes where they had been missing. > > > Best, > Reed > > On Thu, Jun 21, 2018 at 1:41 PM Lum Gim Fong <john1...@gmail.com > <javascript:>> wrote: > >> Thanks for the info. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com <javascript:>. >> To post to this group, send email to rbw-owne...@googlegroups.com >> <javascript:>. >> Visit this group at https://groups.google.com/group/rbw-owners-bunch. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
