I should have mentioned earlier that I aligned and re-installed the arm about five times, and noticed the exact same slip each time, even after cleaning up the gouges as well as I could. All that to say, Keith: PM on its way!
On Sun, Sep 9, 2018 at 12:23 PM iamkeith <keithhar...@gmail.com> wrote: > Sure enough. I could be wrong, but i doubt it "slipped" out of the hole. > It's really easy to install them without being lined up. I've done it a > dozen times, which is why I mentioned it. I'd take a file and smooth the > rough spots, reassemble, and see if it stays in place. > > If it still doesn't work, send me a PM. I might have something to trade, > and my MB-1 has a complete XC Pro group with the exception of brakes. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/ScQIrdkv9gc/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
