As a data point, I can see the pictures and open the links to a new tab. I'm on Chrome running in a Mac looking at the post through groups.google.com.
--Ed C. On Wednesday, October 17, 2018 at 9:11:10 PM UTC-7, Mike Godwin wrote: > > Repost to try this again. Subject line is it. Joe Appaloosa, silver with > double top tube. Not built or ridden. > > > > Frame, fork, FSA headset, Nitto 26.8 seatpost, shimano something sealed > bottom bracket. $950 shipped. Boxed and ready to go. > > > > Standover height at centerline of crank with Conti Speedmax (700x42), > 33.4 inches / 84.8 cm. Standover with WTB 2.1 tires 33.75 inches / 85.7 cm > > > > 700x52 / 2.1 tires measure about 47 mm wide on 14 mm wide rims. This > yields 7 mm clearance at chainstays, and 11 mm side clearance on fork > blades. > > > Rear triangle has three pairs barrel brazeons at top of stays, mid-stay > brazeons, above the dropout eyelets, and two eyelets on dropouts. The upper > dropout eyelet is for a 6 mm bolt, lower is conventional 5 mm. Has brazeons > at top of fork crown, mid-fork barrels and two eyelets on fork dropouts. I > have about 25 photos, some duplicate what is on Riv website. Here are right > side photos with Contis and WTB tires. Contis measure 35 mm from the rim > bead, WTBs measure 44.5 mm from the rim bead. Please send me a note if you > would like to see more photos. > > Mike SLO CA > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
