A little grease on the bolt threads helps too. JohnS
On Friday, December 28, 2018 at 3:04:49 PM UTC-5, Jon Dukeman,central Colorado wrote: > > Try cleaning the stem and bar where they meet of any grease or oil. > Torgue the M8 bolt to :120-140inch pounds or14-16Nm > > Many times we think a bolt is tightened enough but actually isn't. > A torque wrench will prevent damage from over tightening and remove any > doubt. > If you don't have a torgue wrench take your bike to your LBS and they > should check the torque for you free of charge. > If that fails to stop the bars from slipping try shimming the stem as > others have mentioned above. > Jon > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
