Justin, You're bike won't look like that Cheviot because those are different bars than the regular Boscomoose. There was an early run of the bars that were not built to the correct specs and these were referred to as "bad angle" Boscos. I know because I started a thread about it here, and then contacted Riv, and Dave relayed the above the story. At that time, they still had some of the bad angle bars, and I ordered those because I specifically wanted that downward angle on the grip area. I love my bad angle Boscomoose bars on my Appaloosa, but if you order some off the site, you'll be getting the "regular" ones that have a grip area that runs closer to parallel with the ground.
Here's the thread I started a while back because I was curious on why some of the bars looked different than the others: https://groups.google.com/forum/#!searchin/rbw-owners-bunch/bad$20angle$20bosco%7Csort:date/rbw-owners-bunch/3fhrkyiTqw4/2GGYCGFJAgAJ Jonathan On Saturday, February 2, 2019 at 2:35:30 PM UTC-6, Justin, Oakland wrote: > > Hey folks- > Looking for a pic of the BoscoMoose (58cm) on a Saluki/AHH/similarly > geometried bike. I have almost talked myself into it for my Saluki to mount > my baby seat on. But if it looks like the Cheviot on the product page then > that's a No for Me, Dawg. > > Thanks ahead of time! > -J > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
